Instant Urine Cups & Dips

Instant Urine Cups and Instant Urine Dip Cards

Integrated Instant Urine Drug Test Cups

The Confirm BioSciences Integrated Drugs of Abuse Urine Cup can test for up to 11 drugs. Our Multi-Drugs of Abuse Integrated Cup is ideally suited for workplace drug testing.

 

Features & Benefits:

  • Features a split specimen feature allowing the operator to initiate the test when he/she is ready to read the results
  • Temperature strip to test specimen validity
  • Easy-To-Use & Quality Urine Drug Test Cup
  • Features flat test windows enabling the operator to photocopy the results for a permanent patient/donor record
  • Provides results in as little as 4-7 minutes
  • CE Marked for Professional Sale in the European Union
  • Can accommodate a variety of custom configurations
  • Uses a single strip for each drug analyte thereby providing an easier to read result

Clean & Hygienic: The all-in-one urine drug test formula of the Multi-Drug Urine Cup allows for no handling of the (urine) specimen. Once the lid of the urine drug test cup is sealed, the test is bio-hazardous safe so all you have to do is merely throw the drug test cup away when you are done. This is truly a hygienic and clean form of drug testing that’s perfect for random drug testing in the workplace.

Fast Accurate Results: Results are fast, accurate and easy to read. What more could you want out of a drug test?

Test Description Cut-Off Level
AMP Amphetamine 1000 ng/mL and 300 ng/mL
BAR Barbiturates 200 ng/mL
BZD Benzodiazepine 300 ng/mL
COC Cocaine 300 ng/mL
MET Methamphetamine 1000 ng/mL
MOR/OPI Morphine/Opiates 2000 ng/mL
MOR/OPI300 Morphine/Opiates 300 ng/mL
MTD Methadone 300 ng/mL
OXY100 Oxycodone 100 ng/mL
OXY300 Oxycodone 300 ng/mL
PCP Phencyclidine 25 ng/mL
TCA Tricyclic Antidepressants 1000 ng/mL
THC Marijuana 50 ng/mL
XTC Ecstasy 500 ng/mL

Test Proceedure

Test must be in room temperature (10ºC to 30ºC). Bring the test and specimen to room temperature prior to testing.

  1. After the urine has been collected, place the test cup on a flat surface
  2. Open the sealed pouch by tearing along the notch. Remove the test card from the pouch and use it as soon as possible.
  3. Uncover the small cap of the cup, then insert the test card.
  4. Press the test card slowly until liquid level touch the red line.
  5. Release the test card, cover the small cap.
  6. Wait for 5 minutes, remove the label and read the result. Do not read results after 5 minutes

Interpretation of Results

Positive (+): A rose-pink band is visible in each control region. No color band appears in the appropriate test region. It indicates a positive result for the corresponding drug of that specific test zone.

Negative (-): A rose-pink band is visible in each control region and the appropriate test region. It indicates that the concentration of the corresponding drug of that specific test zone is below zero or the detection limit of the test.

Invalid: If a color band is not visible in each of the control region or a color band is only visible in each of the test region, the test is invalid. Another test should be run to re-evaluate the specimen.

Note: There is no meaning attributed to line color intensity or width.

Instant Urine Dip Cards

The Confirm Biosciences multi panel dip test cards can detect up to 12 Illegal and Prescription Drugs and their Metabolites at the Minimum Cutoff Sensitivity Levels Established by the National Institute on Drug Abuse.

Features & Benefits:

  • Our instant urine dip cards can detect the following drugs: Tetrahydrocannabinol -9- carboxylic acid (THC/Marijuana), Cocaine and its metabolite, benzoylecgonine, PCP (Phencyclidine), Morphine and its related metabolites derived from opium (opiates), Methamphetamines, Methadone, Amphetamines, Barbiturates, Benzodiazepines, Methylenedioxymethamphetamine (MDMA), Oxycodone (OXY) and Propoxyphene (PPX)
  • Easy-To-Use & Quality Urine Drug Card
  • CE Marked for Professional Sale in the European Union
  • FDA Cleared

Test Procedure
Test must be in room temperature (10ºC to 30ºC)

  1. Open the sealed pouch by tearing along the notch. Remove the test device from the pouch.
  2. Hold the one side of the device with one hand. Use the other hand to pull out the cap and
    expose the absorbent end.
  3. Immerse the absorbent end into the urine sample about 10 seconds. Make sure that the urine
    level is not above the “MAX” line printed on the front of the device.
  4. Lay the device flat on a clean, dry, non-absorbent surface.
  5. Read the result at 5 minutes. Do not read after 5 minutes.

Interpretation of Results

Positive (+): A rose-pink band is visible in each control region. No color band appears in the appropriate test region. It indicates a positive result for the corresponding drug of that specific test zone.

Negative (-): A rose-pink band is visible in each control region and the appropriate test region. It indicates that the concentration of the corresponding drug of that specific test zone is below zero or the detection limit of the test.

Invalid: If a color band is not visible in each of the control region or a color band is only visible in each of the test region, the test is invalid. Another test should be run to re-evaluate the specimen.

Note: There is no meaning attributed to line color intensity or width.

Additional Information: